Removed a 351 W (1983) stock Intake Manifold, replaced with Weiand Stealth, other than vacuum and plumbing, I have no idea what the extras bells and whistles are on the stock, and do they need to be installed on the Weiand? one looks like a "spark plug". ? Thanks.
The one that looks like a spark plug is either a water temp. sensor or oil temp. sensor. You should keep them there. As for the vacuum lines, most of that is for emissions control and can go. The only vacuum you should need is from the distributor to the carb, the pcv valve to the carb, and the brake booster to the carb. All other vacuum lines can be plugged if there isn't anywhere to reattach them. As for the plumbing, there should only be the gas line, and the heater core and water neck. You definitely need all that obviously. Hope this helps.
Honeywell model HC22A1007 Standard Humidifier Pad Replacement. Fits Honeywell HE220 HE225 And Aprilaire Models 110 220 550 558. Water Panel type media. ...
Sold as one unit. (1 unit = each.) Revolutionary manifold design. Eliminates 17 connections to install. Larger filter capacity-Now 50 gallons per day instead of 24. Certified to remove nitrates. NSF certified standard 58. Includes air gap faucet to meet plumbing codes. Replacement filters-SKU # 4207106-3pk. Easy to install. Boxed . Manufacturer number: WP-5-50. SKU #: 4207098. Country of ori...
Rainbird 6 Outlet Manifold EMT-6XERI 1/2" (15/21) FPT inlet threads onto 1/2" riser and provides a manifold with six free-flowing 1/4" barb outlets. Each barb outlet is sealed with a durable plastic cap. Plastic caps remove easily, allowing for a drip area that can be customized with up to six different emission devices. Use the EMT-6XERI with Xeri- Bugs, PC Modules, Xeri-Pops...
Honeywell HM506H8908 rueSTEAM 6 Gal Humidifier & H8908 Humidistat TrueSTEAM takes the best features from current steam humidifiers with their efficiency, performance and decreased water consumption, and combines it with the ease of installation, reliability and value of flow-through humidifiers. TrueSTEAM is different from others because it operates independent of equipment operation. And, wi...
The Honeywell HC26A1008 is a replacement for HE260, HE360 Humidifier Pads. Used With Honeywell HE260, HE265, HE360, HE365, Aprilaire 350, 360, 560, 568, 600, 700, 760, 768.
Product Specifications
Description HE260 Humidifier Pad
Application Replacement Pads and Filters
Type Humidifier Replacement Pad
Includes Standard Humidifier Pad
Used With Honeywell HE260, HE265, HE360, HE365, Aprilaire 35...
Honeywell C7089U1006 Outdoor Temperature Sensor is used with the TH8000 Vision Pro Thermostat series.Mounting clip allows easy sensor positioning on siding or soffitMay be located up to 200 feet awayPositive temperature coefficient thermistor sensorFactory calibrated; no field calibration requiredOperating Ambient Temperature Range:-40 to 120 F (-40 to 49 C)Display Range:-40 to 127 F (-40 to 53 C)...
* 1" manifold 83/4" x 3/4" copper tube (open)
* Four 1/2" Sharkbite branches
* 2" on center used to simplify manifold and pipe installation in Pex potable water or hydronic heating system
* Just insert the pipe and the stainless steel teeth bite and grip tight
* Creates a water tight joint...
* 3/4" input/output with four 1/2" ports.
* Manifold supplies multiple gas applications in parallel arrangement from main distributing point.
* Attaches to male fitting (Ace no. 4366985) to connect to CSST hose (4365938 or 4365946)....
Molding is used quite often in kitchens in order to improve the appearance of the cooking area and there are many different designs and styles that can be easily used to make the kitchen completely unique and custom in appearance. You could go for just a few decorative touches or adding molding around the cabinet tops, the choice is all yours.
Adding custom crown molding to the top areas of the cabinets in order to give your kitchen a modern, custom look, you first need to measure the room where it will be installed. Don't forget to buy enough molding to last you for the entire project, and an additional 10-15% that will help with fixing any mistakes or cutting waste. Some manufacturers might actually have pre-finished molding that match your actual cabinets, so it might be worth looking that option as well.
When you add molding to your cabinets you can either nail them directly or you could attach a thin particle board that will be used to attach the molding to instead of directly. This will also let you redecorate the cabinets in a different way later on if you so choose.
You can alternatively even glue it to the cabinet door fronts and this technique is especially useful and beautiful for painted Kitchen Cabinets. You can add first the molding and then re-paint the cabinets for a fresh touch.
Adding a chair rail is yet another way you can use them effectively to make your kitchen modern and unique. Or adding wainscoting to the lower wall parts first and then using the chair rail on the top might be also an interesting idea.
Do not be afraid to experiment as there are many possibilities of using molding to give your cooking area a very modern and beautiful look that it deserves.
Another way you can easily improve the appearance of your cooking area is by adding a beautiful vinyl wood flooring. Check out this article to learn more about installing vinyl flooring tiles.
Should we have the same color crown molding in our living room/dining room L-shaped room?
The living room is beige, the dining room is spanish red. We want to put crown molding up in both rooms. The rooms are connected by a corner...it is an L-shaped room. Should we use the same color and size molding in both rooms to match OR because they are different rooms (yet connected) should we use different molding...like white and off white to create a different look in each space?
same size and color if the rooms are truly connected for continuity and flow
Crown molding shelf, also call mantel ledge, is made from solid wood. The crown molding shelf is finely routed and sanded with elegantly curved lines. It's easy to install in a few minutes, comes with all hardware. You can hang several shelves to create library, display and highlight a favorite collectible....
Crown molding shelf, also call mantel ledge, is made from solid wood. The crown molding shelf is finely routed and sanded with elegantly curved lines. It's easy to install in a few minutes, comes with all hardware. You can hang several shelves to create library, display and highlight a favorite collectible....
Crown molding shelf, also call mantel ledge, is made from solid wood. The crown molding shelf is finely routed and sanded with elegantly curved lines. It's easy to install in a few minutes, comes with all hardware. You can hang several shelves to create library, display and highlight a favorite collectible....
Advanced construction/math calculator is packed with solutions for building professionals. Calculates sheets of building material needed, solutions for stairs, roofing materials, compound miter cut angles, materials estimates and more. Also features cost per unit, multiple memory, exponential notation, backspace, user preferences. Stores last 20 entries. Standard calculations and auto shutoff. Pe...
This tool makes humans as close to foolproof as we can get, at least when it comes to measuring, cutting and installing trim without a flaw. We love that it's a solid piece, with nothing adjustable on it, so you know its 45- and 90-degree angles are always true. It takes the gymnastics out of measuring, too, whether screwed to your workbench or temporarily tacked to the working wall with 6d finish...
Installing crown molding is a challenge that every finish carpenter encounters. Nearly every carpenter has their own home-style way of handling it-from making templates and visualizing each cut, to triangulating tangent lines on the ceiling. You can skip all that nonsense. Avoid long learning curves and cut straight to the fun of crown molding by watching these two programs on fundamental and adva...
Crown Molding/Crown Moulding: Nothing puts the finishing touch on a room like crown molding. Our eyes are drawn to the sculpted lines that create an elegant look in even the most modest room. Now you can learn the tricks of installing crown molding. Master carpenter and nationally syndicated columnist Tim Carter shows you the ins and outs of completing a project that would make a pro jealous. ...
American Fluorescent - WCM432R8: Smooth White acrylic diffuser. White finish. ENERGY STAR qualified utilizing F32T8 lamps. Electronic ballast for residential applications. Can be ordered with commercial grade E8 electronic ballast- Consult factory....
The British Museum - This is one of the most popular tourist attractions in London with millions of people visiting the museum each year. It is located on the Great Russell Street, London, WC1 and you can reach it by taking the Tube to Russell Square. You will find almost everything under one roof starting with collections from Egypt, Greek and Roman art, China, old Mesopotamia, Antiques, coins and medals, Prints and drawings, Renaissance and Anglo-Saxon Britain, etc. The sheer size of the museum (2,5 miles of galleries) suggests to you, to wear a good pair of walking shoes and be prepared to spend most of the day there. Whatever your cup of tea is you will have a memorable day out. Open from: Mon-sat 10am-5pm, Sun noon-6pm. Tel: 0207 323 8000.
Churchill Museum and Cabinet War Rooms - Visit the highly interactive and innovative Churchill Museum, the world's first major museum dedicated to life of the 'greatest Briton', plus the secret underground headquarters that were the nerve centre of Britain's war effort. Situated at Clive Steps, King Charles Street London, SW1A 2AQ. Tel: 020 7930 6961. Textphone: 020 7839 4906.
The Clockmaker`s Museum - It is to be found at Guildhall Library, Aldermanbury, London EC2P 2EJ and is open from Monday to Friday (except public holidays) from 9.30am until 4.30pm. Entry is free, via the historic Guildhall Yard. Its collection is the property of the Worshipful Company of Clockmakers and is run by its educational charity. It was founded in 1813 and has been open to the public since 1873. The museum has recently been entirely reconstructed to tell the story of the "Clockmakers of London". It is a priceless collection of clocks, watches, portraits and tools. The most famous single item is John Harrison's 5th Marine Timekeeper, familiar to visitors from around the world because of Dava Sobel's astonishingly successful book, "Longitude". Around Guildhall Yard is grouped the Clock Museum, Guildhall Library (which holds regular temporary exhibitions), the Mediaeval Guildhall and its crypt, Guildhall Art Gallery, the recently discovered east gate to the Roman Amphitheatre and the Wren church of St. Lawrence Jewry, so there is much to see in the immediate vicinity. Map
The Design Museum - Luke Hayes, Design Museum, Shad Thames, London SE1 2YD, 10.00-17.45 daily, T: 0870 833 9955, www.designmuseum.orgThe stylish white edifice is the perfect showcase for an unpretentious display of design products ranging from classic cars to home utensils. Whilst first floor `Review Gallery` acts as a host for new ideas and temporary exhibitions, the top floor `Collections Gallery` is constantly evolving. To replenish your body energy please go to Conran restaurant located on top floor. Shad Thames, London SE1, Tower Hill or Bermondsey tube station.
The Firepower - The Royal Artillery Museum - Firepower, the Royal Artillery Museum in Woolwich tells the powerful and dramatic story of artillery, scientific discoveries made through warfare and human stories of courage and endeavour. The ‘ground shaking' Field of Fire audio-visual show puts you in the midst of battle as shells whiz overhead and guns roar.
The Florence Nightingale Museum - Florence Nightingale was a legend in her lifetime but the Crimean War years which made her famous were just two out of a life of ninety years. If you want to find out more than please visit this museum.
The Foundling Museum - This museum tells the story of the 18th Century Foundling Hospital, and of its Founders and Governors: the campaigning philanthropist Thomas Coram, the artist William Hogarth and the composer George Frideric Handel. A significant collection of works by the hospital's early artist supporters including Gainsborough and Reynolds are displayed in interiors preserved from the original Foundling Hospital. The Foundling Hospital was established at a time when there was scant provision for society's vulnerable. The Museum traces the history of London's first children's charity and features many poignant objects of social history including personal mementoes left by mothers with their infants as means of their identification. The Museum's top floor houses the Gerald Coke Handel Collection, one of the most important collections of memorabilia relating to the composer, who himself was a Governor of the Foundling Hospital.
The Geffrye Museum - This museum presents the changing style of English middle-class interiors from 1600 to the present day through a series of period rooms. It is set in elegant 18th- century almshouses with attractive gardens, including an award-winning herb garden and a series of period gardens (open Apr to Oct). An imaginative education programme for children, families and adults is run throughout the year. Open Tuesday - Saturday 10.00am - 5.00pm, and Sunday and Bank Holiday Mondays from Noon - 5.00pm. Free Admission. Tel: 020 7739 9893.
The Handel House Museum - The great baroque composer George Frideric Handel lived at 25 Brook Street from 1723 until his death in 1759. Here he composed famous works such as ‘Messiah', ‘Zadok the Priest' and ‘Music for the Royal Fireworks'. Today Handel House Museum is a beautifully restored historic house, live music venue and museum offering an insight into Handel's life, 18th-century music and culture. Throughout the House, paintings and prints of Handel and his contemporaries provide a backdrop to Handel's life in London. Today, the House is alive with music as it was during Handel's residence, a special experience for all visitors. There are weekly Thursday evening recitals, events at the weekend and family trails, quizzes and activities. Opening times: Tuesday to Saturday, 10am to 6pm; Thursday 10am – 8pm; Sunday 12pm – 6pm (last admission half an hour before closing) Admission prices: £5 adult, £4.50 concession; £2 child or FREE on Saturdays. Handel House Museum, 25 Brook Street, London, W1K (entrance around the back in Lancashire Court).
The Horniman Museum - Conveniently located, a 13-minute train ride from London Bridge station to Forest Hill is followed by a five-minute walk to the Museum. Also, there is now direct access to the beautiful gardens via a new main entrance - the 16 acres host events throughout the year and have spectacular views over the London skyline. On entering the development, which doubles the existing public space of the museum, you are struck by a feeling of light and space. This now serves as the main entrance, with a wonderful café with barrel vaulted ceiling echoing the original building, and a brand new shop. At the heart of the new building is the central orientation area - 'Gallery Square'. A balcony overlooks the lower ground floor, and from here visitors can access any part of the Horniman. An expanse of glass on one side forms a magnificent picture window and offers views onto Frederick Horniman's 1894 conservatory (Grade ii listed), and the Gardens. Also on this level is the Museum's new education centre which can be configured to accommodate a classroom, a craft space and lunch area for schools, as well as evening classes for adults. Around the balcony is the new "Hands on Base", housing the Museum's prestigious handling collection. Comprising 3,700 objects, especially procured to represent the Museum's three main collections of music instruments, natural history and ethnography, the collection has become an important learning tool for the Horniman's diverse visitor mix including families and community groups, highlighting the many environments and cultures represented by the Museum's varied collections.
The Imperial War Museum - Based in south London with connection of Elephant & Castle, Lambeth North or Waterloo tube line it holds a variety of militaristic display of weapons. From the trenches of WWI and Blitz campaign on London it will try to represent statistics of war and casualties of such things. There is a section of Secret War Gallery that is not so enlightening. Interesting thing about this museum is that the building itself was until 1930 a lunatic asylum that confined Charlie Chaplin`s mother. Open from: daily 10am-6pm.Tel: 0207 416 5000.
Kew Bridge Steam Museum - Built in the 19th century to supply London with water, the museum is recognised as the most important historic site of the water supply industry in Britain. This museum contains the world's largest collection of steam pumping engines, many of which you can see working every weekend. The museum is open from 11.00 a.m to 5.00 p.m. from Tuesday to Sunday. They are closed on Mondays, except Bank Holidays. Last admission at 4.15pm.
The London Motor Museum - Featuring a showroom full of classic cars from the 1950s to the present day the London Motor Museum charts the recent history of the moving vehicle. Cars include pimped up rides from the States and luxury brands from Europe. A Louis Vuitton Cadillac Deville is parked up alongside a Lincoln Continental Lowrider and there are plenty of deluxe names like Aston Martin, Ferrari and Jaguar. If you book in advance you can even have a ride in a pink Cadillac or a Pontiac 79 Trans Am muscle car. London Motor Museum, 3 Nestles Avenue, Hayes, Middlesex, UB3 4SB. Tel: 0800 195 0777. www.londonmotormuseum.co.uk
The London Transport Museum - Makes an interesting place to visit and compare transport from the past and learn facts about today's speed of travel in central London that is only 10 miles per hour. That alone tells you about congestion we experience on daily basis travelling trough London. Plenty of old trains, trams and buses make this exhibition and for those with children there is a chance to hop on and off some buses. Open from: Mon-Thurs, Sat & Sun 10am-6pm, Fri 11am-6pm. Tel: 0207 836 8557.
The Museum in Docklands - London's newest museum unlocks the history of London's river, port and people in an early nineteenth century warehouse at West India Quay. Originally used to house imports of exotic spices, rum and cotton, it now holds a wealth of objects from enormous whale bones to WWII gas masks, which provide glimpses of lost and almost forgotten worlds. Here you can encounter the wide array of people that have come and gone from the Docks over the last 2000 years, from its Roman founders to Viking invaders and from gentleman pirates to today's city workers. The state of the art galleries include a dedicated space for children, called the Mudlarks Gallery. This fully interactive play and learning area introduces kids between 5 and 12 to the history of Docklands. They can winch and weigh cargoes, get a divers eye view of work under water, balance the cargo in the hold of a nineteenth century clipper, and discover archaeological finds in the foreshore discovery box. Museum of Docklands is located at No. 1 Warehouse West India Quay, Hertsmere Road E14. Travel by DLR to West India Quay. Children go free.
The Museum of Childhood Bethnal Green - The Museum of Childhood at Bethnal Green contains one of the largest and oldest collections of toys and childhood artefacts in the world. As well as its permanent displays, the Museum has temporary exhibitions, gallery play areas and every weekend, has art activities V&A Museum of Childhood Memoriesfor children aged 5+ and soft play for under fives, with additional activities during school holidays. It also has a souvenir shop, a café, children's birthday party and corporate hire facilities, and a garden with picnic tables. The collection, which dates from the sixteenth century to the present day is permanently on display to visitors, comprises dolls, dolls' houses, teddy bears, toy soldiers, train sets, model cars, puppets, rocking horses, board games, and some of the very first jigsaw puzzles ever made. In addition to its toys, the Museum houses the national collection of children's costume. The upper gallery is devoted to the theme of growing up through the ages. With its unique display of baby equipment, nursery furniture and children's costume, the gallery explores the experience of childhood, from birth to adolescence. Open: 10.00 - 17.50. Closed: Fridays, 24 - 26 December and 1 January. Admission free. Museum of Childhood at Bethnal Green, Cambridge Heath Road, London E2 9PA.
The Museum of Garden History - Situated in the restored church of St. Mary-at-Lambeth, adjacent to Lambeth Palace on the banks of the River Thames, the Museum of Garden History provides an insight into the history and development of gardens and gardening in the UK, an important facet in our social history. The Museum houses one of the finest public displays of garden tools and garden related artefacts and curiosities in the country, as well as an intriguing collection of garden related ephemera. In addition, a beautiful reproduction 17th century knot garden filled with flowers and shrubs of the period has been created in the graveyard around the tombs of the famous 17th century plant hunters, the John Tradescants, father and son, and Captain William Bligh of the 'Bounty' Opening times: Open Daily 10.30am - 5.00pm (short closed period over Christmas and New Year, contact the Museum for details). Admission rates: Suggested donation Adults £3.00, Concessions £2.50 (Gift shop and café free). Facilities: Café, Gift shop, Toilets, Full disabled access, Library (by appointment only). Nearest tube: Lambeth North, Westminster or Waterloo.
The Museum of London - Can be found near City of London (also called Square Mile because of its size and it's a place where Big Boys operate). Nearest Tube stations are St.Paul`s or Barbican. Its name says it all, and this museum will try to walk you through different eras of life of London. Roman relics are most impressive and they start on your entering of the museum. Ages before and after Great Fire of London are included as well as Georgian and Victorian London with articles of the early twentieth century till present times. The real treasure of Museum of London is though in exhibitions, lectures, walks and videos that are being held and organised throughout the year. Open from: Tues-Sat 10am-5:50pm, Sun noon-5:50pm. Tel: 0207 600 3699.
The Museum of Brands, Packaging and Advertising - The Museum of Brands, Packaging and Advertising is the result of consumer historian, Robert Opie, who saw the need to record the history of the products around us. Starting at the age of sixteen with a packet of Munchies, the Collection now extends to all aspects of daily life – toys, comics, magazines, newspapers, technology, travel, royal souvenirs, fashion and design. Robert says, ‘Whilst families tend to save mementoes from special occasions, it struck me that little was being done to keep the everyday material. When the thousands of pieces of this social history are assembled into some giant jigsaw, the picture becomes clearer as to the remarkable journey we have all come through'.
The Natural History Museum - Based in South Kensington near Hyde Park this museum is our favourite. T-Rex, click for larger imageThe entrance is in Exhibition Road, same as for Science Museum and please beware there is a great possibility of queues so nice, comfortable shoes are a MUST. Skeletons of reptiles are very good and a display of T-Rex excellent. Sabre-tooth tiger and carnivorous reptiles are sights to be seen. We can`t give enough praises to curators who have organised such a majestical show. Insect room is definitely not for people easily scared with bugs and arachnids. Here you will find real life exhibits, like life cycle of housefly. Ecology gallery, Mammals gallery, Mineral Gallery and Earth's gallery that holds a 17-carat diamond and an emerald the size of lemon just call out to you. At the end you will be presented with Earth Today and Tomorrow where you can see what we as a human beings are doing to this planet. Pollution and destruction of Mother Earth are shown here. Open from: Mon-Sat 10am-5:50pm, Sun 11am-5:50pm. Tel: 0207 942 5000.
Going south-east to Greenwich or Maze Hill train station you would come upon the National Maritime Museum. Millions of pounds have been spent in redevelopment programme in preparation of Millennium celebrations. There is the sight of a 63-foot Royal Barge and Admiral Nelsons Gallery with his memorabilia. There is fun to be had for a younger audience in All Hands section and for more mature to take chance to steer a ship out of harbour on a computer-simulated deck. Open from: daily 10am-5pm. Tel: 0208 858 4422.
The RAF Museum - This one is on another side of town and nearest tube station is Colindale. RAF museum exhibitMind you, you will have a fair walk after station so if you are elderly or can't walk try taking local Minicab or hail a Black-cab from the street. Models of planes are waiting for you and if you have children with you there is a Fun `n` Flight gallery where you can have a bit of fun. Open from: daily 10am-6pm. Tel: 0208 205 2266.
The Science Museum - close to South Kensington tube. Seven floors filled with items drawn from every area of science, including space travel, computing, chemistry, medicine and photography. Interactive displays you can find there are a pleasant change in the life of the museums. If you have a specific interest in any of the fields we have mentioned you can get a guided tour from people in museum. Definitely one of the best museums in London. Open from: daily 10am-6pm. Tel: 0207 938 8123.
The Sir John Soane's Museum - The architect Sir John Soane's house, museum and library at No. 13 Lincoln's Inn Fields has been a public museum since the early 19th century. On his appointment as Professor of Architecture at the Royal Academy in 1806 Soane began to arrange the Books, casts and models in order that the students might have the benefit of easy access to them. In 1833 Soane negotiated an Act of Parliament to settle and preserve the house and collection for the benefit of 'amateurs and students' in architecture, painting and sculpture.
The Victoria & Albert Museum - This is a home of applied arts. Due to the sheer variety and scale of exhibits there is bound to be something to grab your attention. The world`s largest collection of Indian art outside India, Chinese, Islamic, Japanese and Korean galleries, more Constable paintings than the Tate; seven Raphael masterpieces and sizable collection of miniatures, watercolours and medieval and Renaissance sculpture, plus many other things. Located near South Kensington tube station, at Cromwell road, SW7. Tel: 0207 942 2000.
The Wallace Collection - The Wallace Collection is both a national museum and the finest private collection of art ever assembled by one family. It was bequeathed to the nation by Lady Wallace, widow of Sir Richard Wallace, in 1897, and opened to the public just over three years later on 22 June 1900. Its first visitors were variously delighted, amazed and bemused. Among its treasures are one of the best collections of French 18th-century pictures, porcelain and furniture in the world, a remarkable array of 17th-century paintings and a superb armoury. The Wallace Collection is located at Hertford House, Manchester Square. Opening hours - Daily 10.00am until 5.00pm (Sundays 12.00pm until 5.00pm). Tel: 0207 563 9500.
About the Author
Remodeling the shower and need a Diamond wholesaw
In need of a diamond whole saw for 3 pieces of porcelain tile that I need to cut holes in to fit around the faucet and handles of my shower..Home depot used to cut them for a minimal charge..They longer have the service available...I have called every home improvement store in town.i called every plumber in town as well as every home improvement contractor centers..
One place wanted to charge me $200 for the privilege of them taking a whole hour to cut 3 holes in tiles that take 3 minutes and charge me $200 for the hour...
Suggestions when i can buy a 1 3/4 and 3 3/4 diamond whole saw would be greatly appreciated..
Any locations online where i can buy these?
Harbor Freight or Homier sell inexpensive tools but a small tile drill like a 3/16 or 1/4 then drill a bunch of holes around the size hole you need is probably the cheapest way out for just 3 holes.
The MK Diamond 158434 MK-225 Hot Dog Diamond Blade is a premium-grade, thin-rim diamond blade built for wet cutting marble, porcelain, vitreous, and ceramic tile. Designed with innovative tenison slots, the MK-225 prevents dishing and blade wobble for precise cuts and improved safety. The blade's stiffened slot and ultra-thin kerf allow the MK-225 to cut with less drag and resistance than any othe...
Cut through porcelain and old tile quickly and effectively with the durable DW4762 10-Inch Wet Cutting Continuous Rim Saw Blade. Featuring an optimized cutting matrix and consistent diamond concentration and distribution that results in reliable performance, this blade is a job-specific tool designed for wet applications. Crafted to ensure a the longest possible life and safe, predictable performa...
For the DYI, here are a few steps for proper tile installation. Installing ceramic tile is not hard by any means, just follow these step and have some patience and everything will fall into place.
1. Surface Preparation
Ceramic tile may be installed over most structurally-sound substrates. Make sure all surfaces to be tiled are clean, smooth, dry and free of wax, soap scum and grease. Any damaged, loose or uneven areas must be repaired, patched, and leveled. Remove all moldings, trims, appliances, etc. which may interfere with the installation. Door jambs may be undercut for tiles to slip under.
2. Layout
When tiling walls, tubs, or shower areas, begin by finding the center point of the wall. Use a level to draw a plumb line in the center of the wall. Align a row of loose tiles across the bottom of the wall from the center line, leaving uniform joints between tiles. If your tiles have integral spacer lugs, the tiles can be abutted to automatically leave consistent 1/16" joints. If this layout leaves small cuts (less than 1/2 tile) at walls then adjust plumb center line a half tile closer to the side wall.
Now determine the lowest point of the floor (or tub) by horizontally using a level. Stack two tiles here, and at the top draw a horizontal line on the wall. With a level, continue the line around all side walls to be tiles. This line is a guideline for the first row of tiles to be set above. Begin installing tiles to the center of the wall above the horizontal guideline. Install one half of the back wall at a time. Set the lower two rows last. Cut and fit bottom tiles against the floor (or tub) if not level. Leave a 1/8" gap above the tub for caulking to seal around tub.
Repeat the above process for side walls. Mark outside tile lines on walls that will not be completely tiled in order to spread adhesive. Leave out tiles where you plan to install ceramic accessories (soap dish, towel bar, etc.) Use bullnose trim pieces to finish edges on walls where necessary.
Floor Layout:
When tiling floors, begin by marking the center points of all four walls. Snap chalk lines between the center points of opposite walls. The lines will intersect in the center of the room. Make sure that the lines make perfect squares and adjust if necessary.
Lay out a row of loose tiles along the center lines in both directions, leaving spaces for uniform joints between the tiles (use tile spacers). If this layout leaves small cuts (less than 1/2 tile) at walls, then adjust the center line by snapping a new Chalk Line a half tile closer to the wall.
Repeat this process along the other center line, adjusting as necessary. Now divide the room into smaller grids by snapping additional chalk lines parallel to the center lines. To fit the exact dimensions of these grids, lay out an area of tile approximately 2' x 3' starting in the center of the room along the center lines. Use tile spacers or leave equal joints between the tiles. Measure this grid and use the dimensions for each
smaller grid throughout the room.
Begin installing tiles in the center of the room. Install one quarter of the room, one quarter at a time. Finish each grid before moving on to the next one. Cut and fit the perimeter tiles in each grid last. Leave a 1/4" gap between the tile and walls. Do not walk on fresh tiles for about 24 hours until they set.
Countertop Layout:
When tiling counters, lay out tiles from front to back. Begin with counter trim then set full tiles on the first row working backward, so all cuts are made on the back row against the wall. Special trim pieces are available for use around recessed sinks, appliances, etc. if necessary. Snap parallel chalk lines on the substrate as needed to keep rows straight.
For backsplashes, match up joints with the countertop tile.
Begin with full tiles at the counter, working up so that all cuts are made on the top row under cabinets. Use bullnose trim pieces on flat walls or sides. Tile countertops should have a tile backsplash at least four inches high for protection.
3. Setting Tile:
Variation of shade and texture is an inherent characteristic of ceramic tiles. For a blended effect, mix tiles from several cartons as you set.
Tile ceilings before walls, Tile walls before floors.
Tile countertops before backsplashes. Once you have chosen the proper adhesive or mortar, read all instructions and precautions on the package before using. Mix thinset or mortar according to the directions on the package. Mix only enough to be used within 30 minutes.
Pre-mixed wall tile adhesives can be applied directly from the can without mixing. Determine the appropriate type of trowel (V or square-notch) and the right size (depth of notches) for the type of tile you are setting. Refer to the setting material package for recommendations.
Applying Adhesives:
Spread a 1/4" thick coat of adhesive onto the surface of one grid area using the flat side of the trowel. Do not cover the guidelines. When completed, immediately use the notch side of the trowel to comb adhesive into standing ridges by holding the trowel at a 45 degree angle. Remove any excess adhesive, leaving the setting bed uniform and ridged. Spread no more area than can be set in 15 minutes.
Setting Tile:
After determining the appropriate adhesive and mortar, begin setting the tile. Start with the first tile in the corner of the grid and work outward. Set tiles one at a time using a slight twisting motion. Do not slide tiles into place. Insert tile spacers as each tile is set, or leave equal joints between tiles. Continue until all tiles within the grid are set. When grid is completely installed, tap the tiles in with a rubber mallet or hammer and wood block to ensure a good bond and a level plane. Remove any excess adhesive from joints with a Putty Knife and from the face of tiles with a damp sponge before moving on to the next grid.
Each grid must be installed correctly and completely within the layout grid lines for a successful overall installation.
Cutting Tile:
Measure tiles to be cut carefully and mark with a pencil or felt-tip pen. Edges that are too sharp may be smoothed with a carborundum stone. Make straight or diagonal cuts using a Tile Cutter. Make small curved cuts with nippers. Chip away small pieces for best results. Make full length curved cuts with a rod saw.
Soap dishes, towel bars, paper holders, etc. should be set in the spaces left out for them.
Apply a room temperature, silicone sealant to the back of each accessory. Position over hole and press firmly. Wipe off any excess silicone that may have leaked out from the sides. Use masking tap to hold in place and prevent slippage during cure time. After 24 hours, remove tape and grout perimeter edges.
4. Grouting Joints:
Before grouting joints, the tile should be well-set to prevent breaking the bond. Refer to the adhesive package for specific time. Generally, you should wait about 24 hours before grouting. Remove all the spacers used for setting. For the correct type of grout for your tile installations, refer to the following chart:
Wall/Counter Tile:
Joint Width Grout Type
Less than 1/8"
More than 1/8" Non-sanded
Fine-grain sanded
Floor Tile:
Joint Width Grout Type
Less than 1/8"
1/8" to 3/16"
More than 1/8" Non-sanded
Fine-grain sanded
Coarse-grain sanded
Determine the grout color of your choice. For best results, choose on the color-coordinates with the tile.
Carefully read all instructions and precautions on the package. Mix grout according to instructions. Make only enough to use within about 30 minutes. Wear protective gloves to protect your skin. Spread the mixed grout on the tiled surface, forcing grout down into joints with a rubber grout float or squeegee. Tilt the float at a 45 degree angle to aid the compacting action. Remove excess grout from the surface immediately with edge of float. Tilt float at a 90 degree angle and scrape it diagonally across the tiles. Continue the process of compacting, then scraping off excess, until you have grouted for approximately 30 minutes or when the mixture begins to stiffen. Discard stiffened grout mixture and begin cleanup procedure.
Cleanup:
Wait 15 to 20 minutes for grout to set slightly, the use a damp sponge to clean grout residue from the surface and smooth the grout joints. Rinse sponge frequently and change water as needed. Let the area dry until grout becomes hard and a haze forms on the tile surface, then polish with a soft cloth. If haze is stubborn, you may want to rinse again with a sponge and clean water. Wait 72 hours before heavy use. Do not apply sealers or polishes for three weeks until fully-cured, and only in accordance with manufacturer's recommendations.
About the Author
Bruce Mendes has been in the retail trade business for 15 years specializing in flooring and cabinetry. He has a high end showroom in Central Ohio and a web presence at . If you have any questions or comments you can email him at
Removing ceiling texture?
Just bought a 40 year old house that has swirls on the ceiling. The swirls starts in the middle with a small swirled circle with larger and larger swirled circles around the middle point. The design is dated and I want to remove it.
Should I simply soak and scrape like you would a popcorn ceiling? or do I need to take a different approach?
And what is likely the product used to make the circles? (it looks like a trowel was used and it probably took a lot of craftsmanship to make them so uniform)
I want to attempt to soak and scrape, does anyone think this is bad idea and do I need to check anything else before I start?
Thanks for you input!
Hello, I operate Straight Nails Construction, and would like to help with your question. Whether you have popcorn ceiling, stipple ceiling, or your "artwork", most should be prepped by misting with a water bottle and allowing that water to be absorbed prior to scraping the ceiling. There is an inexpensive tool that can be purchased at the home improvement stores that will scrape the ceiling and allow the droppings to fall into a bag, or I have even hooked it up to my shop vac. Note that this will make a huge mess, so the more furniture you can move/cover, the better off you will be. Even after scraping, you will probably have to sand the ceiling to get rid of rough spots and have to use spackle to patch any holes/mistakes and sand to a paintable surface. You will probably want to use a quality primer on those ceilings before you paint. Sherwin Williams makes a good ceiling paint that isn't too expensive. I hope this helps.
TEXTURE POLISHING TROWEL - Stainless steel trowel with soft grip handle ~ Used to knock down texture stipple marks ~ Achieves McCloskey's sculptured stone look ~ For burnishing venetian plaster finishes...
Sold as each. 11" x 4-1/2". 1/4" x 3/16" V notch. Aluminum alloy mounting riveted to a hard tempered steel blade. Soft grip handle for extra comfort and grip. . Manufacturer number: 15676. Country of origin: China. Distributed by Marshalltown Trowel Co....
The Magic Trowels patented blade is designed to smooth out and spread all compounds without leaving those annoying trowel lines. This product will help reduce the sanding you would normally have with metal blades. A real time and labor saving product....
In this article I shall be discussing the various different types of Pex Pipe and PEX Fittings that are currently available to you.
PEX Fittings can be of 2 types – the slide in style and the easy style. The latter refers to the crimp style. You can easily accomplish PEX piping and Pex Tubing. First of all, your job is to find out and determine which type of PEX piping will be best in your condition. Then you can use the required fittings.
The slide on fittings is available in brass and plastic. And if you go for the crimp style ones, you will find that they are available in both brass and engineered plastic. You can separately purchase rings that can be attached to them.
A few different types of PEX Fittings that are widely in use and are currently sold in the markets are Female Sweat adapters, straight couplings, Tee Fittings, end cap, Stainless Steel cinch stamp and copper crimps.
Hydro PEX Crimp fittings
You can use these types of fittings both with the Copper Crimp ring system as well as the stainless steel made clamping system. They are truly compatible with Pex Plumbing. If you are using these for PEX tubing, you will be able to make the necessary connections. You also need not worry about the quality of these fittings as they are compliant with the ASTM F 1087 standard. These fittings are compatible with Viega Pex Tubing, Vanguard, Watts, Zurn, Therma, Hepex and Aquapex.
Shark Bite Fittings
These ones are push fit fittings that have simplified the installation of pipes, such is their design. These ones have been designed in such a manner that it takes only seconds to connect pipes and that too with ease.
ProPEX Expander Fittings
These ones belong to the style called expansion style fittings. Uponor or erstwhile Wirsbo are the manufacturers of these kinds of PEX Fittings. It is the most widely used and trusted PEX Tubing connection throughout USA and Europe. To use these types of fittings, you will require a compatible ring and an expansion tool of the same brand. Together you can create your connections of PEX pipe.
Watts Quick Connect Fittings
Are you looking for a design that permits easy and quick connections and which also won't require installation tools? Do you want a zero leak connection? If so, you have to simply discard the polybutylene or CPVC or copper or plastic piping and use a Watts quick connect fittings.
You can also take a look at PEX Compression adapters and couplings, polyAlloy PEX Crimp Fittings and PEX Press Fittings
How do you cut the copper bands on pex piping so you can repair something?
I have the pex crimping tool to replace the copper bands. the only way I know how to remove the old bands is to cut them off with a hacksaw or grinder. is there any other solution
Since youve got the crimping tool.. and I assume the bands... you'll find it faster to just cut the joint out, and replace it.
You're most likely working in close quarters, so I would not advise using a grinder...if you send a spark or hot chip into the wrong place, you could be calling the fire department. That leaves you with a hacksaw...
If I were doing the repair, I would simply cut the joint out, and replace it... my time is worth more than the fitting. Once I got it out from under the home... then I could clamp it in a vise, and cut it with a hack saw, or Reciprocating Saw, easily, and save the part for future use.
Tip - remember to do the hardest to reach crimp first, heheh.
Have Fun
PEX Crimper, TOOL 18026: COMBO PEX CRMP TL 1/2-3/4 USA
Exclusively made by Everhot, this PEX Crimper Tool Kit works with 4 sizes of PEX tubing - 3/8", 1/2", 5/8", 3/4" and includes a Decrimping Tool (for crimp ring removal) - all in a compact and durable case. Compatible with all types of PEX copper crimp rings and crimp style PEX fittings. The following is included with every kit 14" long PEX crimp......
WBT's Crimping method is the preferred technique because it produces a physically and chemically optimum contact point with low transition resistance, which ensures pure signal transmission. For the procedure itself one must first strip the cable and insert it into the crimp sleeve. Insert the wire and sleeve into the proper slot on the crimper, and squeeze. The crimp and unique crescent shape ...
WBT's Crimping method is the preferred technique because it produces a physically and chemically optimum contact point with low transition resistance, which ensures pure signal transmission. For the procedure itself one must first strip the cable and insert it into the crimp sleeve. Insert the wire and sleeve into the proper slot on the crimper, and squeeze. The crimp and unique crescent shape ...
Now you can save yourself an expensive call to the plumber - The BEST-PEX plumbing is a complete do-it-yourself PEX tubing system for home building or remodeling. Tools, tubing and accessories are available in 3/8", 1/2", 3/4" and I" ID sizes. Download our easy to understand installation guide and get started today....
US $74.95
